Description
Savvy Offroad Krawler Lite Aluminum Rear Bumper | 2020-2026 Jeep Gladiator JT The Highest Clearance Bolt On Rear Bumper Built for the Gladiator
Details
- 2020-2026 Jeep Gladiator JT owners who want the maximum available departure clearance without a permanent bed chop
- Gladiator rock crawlers and serious trail rigs where departure angle is the limiting factor on technical terrain
- Builders who tow regularly and need maximum clearance without sacrificing hitch capability
- Gladiator owners who want aluminum not steel on their rear end for weight savings and corrosion resistance
- Builders who want a modular, repairable bumper system rather than a one-piece steel unit that permanently dents on the trail
Features
- 10" Extra Departure Clearance Without Hitch 6.5" With Hitch : The highest clearance numbers of any bolt-on aluminum rear bumper available for the Jeep Gladiator JT. Competitors offering comparable clearance either require a bed chop, remove hitch capability entirely, or use steel that adds weight the Gladiator's long rear overhang does not need. Savvy delivers all three advantages maximum clearance, hitch retention, and aluminum construction in one bumper
- 5052 Aluminum Skin + Steel Crossmember, Best of Both Materials : The outer skin is 3/16" 5052 aluminum the same marine and aerospace-grade alloy used throughout the Krawler Lite system for its corrosion resistance and strength-to-weight ratio. The structural crossmember is 3/16" steel because that is where the load goes during recovery and towing, and steel is the right material there. The Krawler Lite uses both where each performs best, rather than compromising the entire bumper for a single material
- Replaceable Skin, End Caps & Bed Caps, Modular From the Start : The outer aluminum skin, the end caps, and the bed caps are all separate replaceable components. Take a hard hit on the trail and damage the skin? Order a replacement, swap it out. The structural crossmember and recovery mounts stay on the Gladiator. This level of modular repairability does not exist on steel bumpers in this category a dented steel bumper is permanent damage or a fabrication repair. A dented Savvy skin is a parts order
- Hidden D-Ring Recovery Mounts : 3/4" steel recovery points are built seamlessly into the crossmember structure not bolted onto the outside as visible afterthoughts, but integrated so they sit flush and clean when not in use. Strong enough for real winch recoveries. Low-profile enough that they don't add snag points or visual bulk to the bumper profile
- JL-Style Hitch Compatibility, Tow Without Compromise : Works with the factory Mopar JL hitch (P/N: 82215209) and plug bracket (P/N: 68258743AA). Most high-clearance JT rear bumpers force you to choose between maximum clearance and tow capability. The Krawler Lite gives you both. Note: JK hitches will not fit, JL-style hitch required
- License Plate Relocation with LED Lights Included : A tailgate-mounted license plate relocation bracket with LED lighting is included in the kit. Street-legal, clean, and integrated not an add-on you have to source separately after installation
- Custom Lighting Ready : The rear skin can be cut with cutting templates for Rigid Industries SR-L Flush Mount, Rigid Ignite Flush Mount, and Baja Designs S1 & S2 Non-Flush Mount lights. All lighting sold separately
- Minor Body Trimming Required : The Krawler Lite's extreme clearance geometry requires minor trimming of the pinch seam under the tailgate for proper fitment. This is a small trade-off for 10 inches of departure clearance improvement and is detailed fully in the installation instructions included with the bumper. SEE BELOW
- Made in the USA : CNC laser-cut and bent for precision fitment using updated Jeep Gladiator JT CAD data. Designed, tested, and built in America by the same team that has competed and won at King of the Hammers
Specs
- Fitment: 2020-2026 Jeep Gladiator JT (all trim levels)
- Material: 3/16" 5052 aluminum outer skin + 3/16" steel crossmember
- Clearance Gain: 10" without hitch, 6.75" with hitch
- Recovery Points: Hidden integrated 3/4" steel D-ring mounts
- Hitch: JL-style hitch compatible Mopar P/N 82215209 and plug bracket P/N 68258743AA (JK hitches will not fit)
- License Plate: Tailgate-mounted relocation bracket with LED lights included
- Lighting: Cuttable templates for Rigid SR-L Flush Mount, Rigid Ignite Flush Mount, Baja Designs S1 & S2 Non-Flush Mount (sold separately) can be used to trim the skin
- Modular Components: Replaceable outer skin, end caps, and bed caps
- Installation: Bolt-on minor trimming required for fitment
- Finish: Ships raw aluminum ready for powder coat or paint
- Manufacturing: CNC laser-cut and bent in the USA
Brand: Savvy Offroad
Part number: SD0039












Reviews
There are no reviews yet.