Description
Savvy Offroad Legacy 6061-T651 Aluminum Front Bumper Without Hoop | 2018-2026 Jeep Wrangler JL / JLU & 2020-2026 Jeep Gladiator JT
Details
- King of the Hammers: The most demanding off-road race on earth. Ultra-four rock crawling at speed. If your armor survives here, it survives everything
- Baja : High-speed desert racing where vibration, heat, and repeated impact over hundreds of miles separate real engineering from spec sheet marketing
Features
- Higher Clearance 8 lb 6061 Aluminum Skin, Lightest in the Savvy Lineup : The Legacy no-hoop front bumper skin weighs just 8 lbs, 2.5 lbs lighter than the Krawler Lite equivalent and the lightest skin in Savvy's entire front bumper range. 6061 aluminum achieves this because it is a stronger alloy per pound, allowing the same 3/16" thickness to deliver more strength at less weight than 5052. Less front-end weight means better handling, less front sag on lifted JLs and JTs, and improved fuel economy on daily-driven builds
- 6061 The Strongest Aluminum Alloy in Savvy's Bumper Line : Heat-treated, precipitation-hardened structural aluminum with approximately 35% higher tensile strength and nearly double the yield strength of 5052. Harder surface, higher impact resistance, better behavior under repeated direct rock contact on approach. This is the alloy used in aerospace structural components and precision machined applications where impact resistance is the primary design criterion. At 3/16" and 8 lbs, it is the right alloy for a front bumper skin that takes the first hit on every approach
- Maximum Approach Clearance, Frame Plate Trimming Required : The Legacy front bumper achieves its maximum approach geometry by requiring trimming of the front frame plates during installation. This repositions the bumper lower and tighter against the JL, JLU, and JT body than a no-modification design allows. Full installation instructions are included. This is the modification that unlocks the clearance geometry
- Winch Plate, Bolt or Weld, Your Choice : The 3/16" steel winch plate can be bolted to the frame for a strong, removable installation, or welded for a permanent, maximum-strength connection. No other front bumper in this category gives you that choice at the time of installation. Savvy builds the flexibility in so you decide based on your build and how permanent you want the setup to be
- Compatible with All Major Winches : Warn XD (FITS BEST), Warn Zeon (FITS BEST), Warn VR Evo, Smittybilt, Badlands, and Superwinches
- Factor 55 Fairlead Cutout : Hawse fairlead cutout specifically designed for Factor 55 fairleads to protect synthetic winch rope from sharp edges and prevent rope wear and fatigue. Other fairleads may require minor trimming
- Centered D-Ring Recovery Mounts : 3/4" thick laser-cut steel D-ring mounts centered on the winch plate the strongest pull point on the vehicle. Centering eliminates yaw during winch recoveries for safer, more controlled extractions on uneven terrain
- Modular Replaceable Front Skin : The 8 lb aluminum skin is a separate modular component from the steel winch plate. Take a hard hit? Replace the skin. The winch plate, D-ring mounts, and mounting hardware stay on the Jeep throughout the process. Order a skin, not a bumper
- Maximum Airflow & Lighting Flexibility, No Hoop : The open, no-hoop design maximizes radiator airflow and gives complete freedom in auxiliary lighting placement. Mount a light bar above on a separate bracket, run A-pillar pods, or run no additional lights nothing in the way of your setup
- Fits JL, JLU, and JT Gladiator : One bumper design fits the 2018-2026 Jeep Wrangler JL, JLU, and 2020-2026 Jeep Gladiator JT. The same premium 6061aluminum, the same steel winch plate, the same clearance geometry across all three platforms
- Made in the USA : CNC laser-cut and engineered in America. Winch and shackles shown in images not included and must be purchased separately
Specs
- Fitment: 2018-2026 Jeep Wrangler JL / JLU & 2020-2026 Jeep Gladiator JT
- Skin Material: 3/16" 6061 CNC laser-cut & bent aluminum heat-treated structural alloy
- Skin Weight: 8 lbs
- Winch Plate: 3/16" steel bolt-on or weld-on at installer's choice
- Installation: Requires trimming front frame plates full instructions included
- Winch Compatibility: Warn XD, Warn Zeon, Warn VR Evo, Smittybilt, Badlands, Superwinches (FITS BEST WITH WARN ZEON & XD & XP)
- Fairlead: Factor 55 hawse fairlead cutout (other fairleads may require minor trimming)
- Recovery Points: Centered 3/4" thick laser-cut steel D-ring mounts
- Design: Modular replaceable 8 lb aluminum skin independent of winch plate
- Finish: Ships raw aluminum ready for powder coat or paint
- Note: Winch and shackles shown in images not included
- Manufacturing: CNC laser-cut in the USA
Brand: Savvy Offroad
Part number: SD0069












Reviews
There are no reviews yet.