Savvy Offroad 2018-2026 Jeep Jl/Jlu/Jt Front Bumper With Hoop (Legacy 6061 Aluminum) Savvy Offroad (SD0070)

$1,700.50

Savvy Offroad 2018-2026 Jeep Jl/Jlu/Jt Front Bumper With Hoop (Legacy 6061 Aluminum) Savvy Offroad.

Available on backorder

Available on backorder

SKU: SD0070
Category:
Brands:

Description

Savvy Offroad Legacy 6061-T651 Aluminum Front Bumper With Hoop | 2018-2026 Jeep Wrangler JL / JLU & 2020-2026 Jeep Gladiator JT

Details

  • King of the Hammers : The most demanding off-road race on earth. If your armor survives here, it survives everything
  • Baja : High-speed desert racing where vibration, heat, and repeated impact over hundreds of miles separate real engineering from spec sheet marketing

Features

  • Higher Clearance 8 lb 6061 Aluminum Skin, Lightest & Strongest in the Savvy Lineup: The Legacy with-hoop front bumper skin weighs just 8 lbs, 2.5 lbs lighter than the Krawler Lite equivalent and the lightest skin in Savvy's entire front bumper range. 6061 achieves this because it is a stronger alloy per pound, delivering more tensile strength and impact resistance at the same 3/16" thickness. Less front-end weight means better handling, less front sag on lifted builds, and improved fuel economy on daily-driven JLs and JTs
  • 6061 The Strongest Aluminum in Savvy's Bumper Line : Heat-treated, precipitation-hardened structural aluminum with approximately 35% higher tensile strength and nearly double the yield strength of 5052. Harder surface, higher impact resistance, better behavior under repeated direct rock contact on approach. The alloy used in aerospace structural components and precision machined applications where impact resistance is the primary design criterion
  • Bolt-On Front Hoop, Grille, Winch & Light Protection : The protective front hoop guards your grille, radiator, and any front-mounted auxiliary lights from rocks, brush, and trail debris. Enhances approach angles while giving your JL, JLU, or JT an aggressive, trail-ready profile. Bolt-on design means it can be removed if your build evolves to the no-hoop configuration
  • Maximum Approach Clearance, Frame Plate Trimming Required : The Legacy front bumper achieves its maximum approach geometry by requiring trimming of the front frame plates during installation. This is the modification that unlocks the clearance geometry. Full installation instructions included. For a no-modification bolt-on option, see the Krawler Lite front bumper with hoop
  • Winch Plate, Bolt or Weld, Your Choice : The 3/16" steel winch plate can be bolted for a strong, removable installation or welded for a permanent maximum-strength connection. You decide at install time. No other front bumper in this category gives you that choice
  • Compatible with All Major Winches : Warn XD (FITS BEST), Warn Zeon (FITS BEST), Warn VR Evo, Smittybilt, Badlands, and Superwinches. No adapters or modifications required
  • Factor 55 Fairlead Cutout : Hawse fairlead cutout designed specifically for Factor 55 fairleads to protect synthetic winch rope from sharp edges. Other fairleads may require minor trimming
  • Centered D-Ring Recovery Mounts : 3/4" thick laser-cut steel D-ring mounts centered on the winch plate the strongest pull point on the vehicle. Centering eliminates yaw during winch recoveries for safer, more controlled extractions on uneven terrain
  • Modular Replaceable Front Skin : The 8 lb aluminum skin is a separate modular component from the steel winch plate. Take a hard hit? Replace the skin not the bumper. The winch plate, D-ring mounts, hoop, and mounting hardware stay on the Jeep throughout the process
  • Auxiliary Lighting Ready : Ample clearance behind the hoop for mounting auxiliary off-road lights. Compatible with most aftermarket lighting brackets and pods without interfering with grille airflow
  • Fits JL, JLU, and JT Gladiator : One bumper design fits the 2018-2026 Jeep Wrangler JL, JLU, and 2020-2026 Jeep Gladiator JT
  • Made in the USA : CNC laser-cut and engineered in America. Winch and shackles shown in images not included and must be purchased separately

Specs

  • Fitment: 2018-2026 Jeep Wrangler JL / JLU & 2020-2026 Jeep Gladiator JT
  • Skin Material: 3/16" 6061 CNC laser-cut & bent aluminum heat-treated structural alloy
  • Skin Weight: 8 lbs
  • Winch Plate: 3/16" steel bolt-on or weld-on at installer's choice
  • Hoop: Bolt-on front hoop included grille and lighting protection
  • Installation: Requires trimming front frame plates full instructions included
  • Winch Compatibility: Warn XD & XP (FITS BEST) , Warn Zeon (FITS BEST), Warn VR Evo, Smittybilt, Badlands, Superwinches
  • Fairlead: Factor 55 hawse fairlead cutout (other fairleads may require minor trimming)
  • Recovery Points: Centered 3/4" thick laser-cut steel D-ring mounts
  • Design: Modular replaceable 8 lb aluminum skin independent of winch plate
  • Finish: Ships raw aluminum ready for powder coat or paint
  • Note: Winch and shackles shown in images not included

Brand: Savvy Offroad
Part number: SD0070

Additional information

Brand

Savvy Offroad

Reviews

There are no reviews yet.

Be the first to review “Savvy Offroad 2018-2026 Jeep Jl/Jlu/Jt Front Bumper With Hoop (Legacy 6061 Aluminum) Savvy Offroad (SD0070)”

Your email address will not be published. Required fields are marked *