Description
Part of RockJock’s Currectlync steering line for Jeeps.
Fits
- JK Wrangler Unlimited (4-door) – All Models (with stock front differential)
- JK Wrangler Unlimited (4-door) – All Right Hand Drive Models (with stock front differential)
- JK Wrangler (2-door) – All Models (with stock front differential)
- JK Wrangler (2-door) – All Right Hand Drive Models (with stock front differential)
What’s included
- 45mm (1.65 in.) Alloy Steel Tie Rod Assembly (w/ Ends)
- Flipped Drag Link Assembly (w/ Ends)
- Tapered Sleeve for Passenger’s Side Knuckle
- Forged Steering Stabilizer Shock Bracket Kit
- All required hardware
Specs and features
- Intended for use with 0–6 in. of lift out of the box
- For use on any factory JK Dana 30 and Dana 44 differentials
- Drilling of the passenger’s side knuckle’s drag link hole is required for installation of the tapered sleeve that is included in this kit
- Tie Rod = 42mm (1.650 in.) dia. alloy steel tube with indexed ends for maximum strength
- Tie Rod Ends = 1 1/8 in.-18 RH/LH threads, forged steel
- Drag Link = 1.300 in. dia. forged steel
- Drag Link Ends = 1 1/8 in.-18 RH/LH threads, forged steel
- Drag Link Adjuster Sleeve = 5.080 in. Long x 1 1/8 in.-18 RH/LH threads, steel
- Flipped Drag Link Tapered Knuckle Sleeve = fits into a .875 in. hole
- Steering Stabilizer Shock Bracket = forged 4130 chromoly steel
Good to know
- The raised hole of either of these options must be used with this flipped drag link
- Do not use this unit outboard of the lift amount requirements outlined above
- Some grinding and fitment may need to be done for optimum clearance and performance
- You must grease all rod ends via their zerk fittings before use
- Grease unit with non-synthetic, hi-moly lube grease, such as RockJock’s CE-9013G
Brand: RockJock 4×4
Part number: JK-9704P








Reviews
There are no reviews yet.