Description
Double your pulling power or change the angle of your pull, a must-have in any recovery bag. Built by Warrior Winches, the same brand behind the winches and hoists we carry, and shipped to the lower 48 by PNW Offroad Gear of Ridgefield, WA.
Key details
- Part number: PBK900-CAD
From Warrior Winches
This heavy duty 8800 lbs pulley block is suitable for both steel and synthetic* ropes up to 0.275″ (7mm). The main body is coated with a tough powder coated finish and the roller is finished with a durable zinc/galvanised finish. This is a great piece of equipment for use by ATV and small 4×4’s.
A very important piece of equipment for anyone taking a vehicle off road.
Dimensions:
- Overall Size = 5.7 x 3 x 1″
- Hole Size = 1.5″
- Roller Size = 2.56″
- Pin Size = 0.55″
- Maximum Capacity 8800 lbs (4000 kg)
*It is important that a pulley with a damaged roller must not be used with a synthetic rope as it could possibly damage the cable.
Not sure it fits your winch? Email [email protected] with your winch model and we’ll check before you order.








Reviews
There are no reviews yet.