Description
Savvy Offroad Legacy 6061-T651 Aluminum Front Bumper With Hoop | 2007-2018 Jeep Wrangler JK / JKU
Details
- King of the Hammers : The most demanding off-road race on earth. If your armor survives here, it survives everything
- Baja : High-speed desert racing where vibration, heat, and repeated impact over hundreds of miles separate real engineering from spec sheet marketing
Features
- High Clearance 8.5 lb 6061 Aluminum Skin Lightest & Strongest on the JK Platform : The Legacy with-hoop JK front bumper skin weighs just 8.5 lbs 2 lbs lighter than the Krawler Lite equivalent. 6061 delivers more tensile strength and impact resistance at the same 3/16" thickness than 5052. Less front-end weight means better handling, less front axle stress on lifted JKs, and improved fuel economy on daily-driven builds
- 6061 The Strongest Aluminum in Savvy's Bumper Line : Heat-treated, precipitation-hardened structural aluminum with approximately 35% higher tensile strength and nearly double the yield strength of 5052. Harder surface, higher impact resistance, better behavior under repeated direct rock contact. The alloy used in aerospace structural components where impact resistance is the primary design criterion
- Front Hoop, Grille, Winch & Light Protection : The protective hoop guards your grille, radiator, winch, and any front-mounted auxiliary lighting from rocks, brush, and trail debris. Enhances approach angles while giving the JK an aggressive, trail-ready front profile. If your build runs front lights or a winch you want protected, the hoop is the right choice
- Maximum Approach Clearance, Frame Plate Trimming Required : The Legacy JK front bumper achieves its maximum approach geometry by requiring trimming of the front frame plates. This is the modification that unlocks the clearance geometry the tightest, lowest-profile with-hoop front bumper available for the JK platform. Full installation instructions included. (SEE INSTRUCTIONS BELOW)
- Weld-On Winch Plate, Permanent Maximum Strength : On the JK version, the 3/16" steel winch plate welds on permanently. No movement, no backing out under vibration or recovery load, no flex. This is the most rigid winch plate mounting method available
- Compatible with Major Winches : Warn XD & XP (FITS BEST), Warn Zeon (FITS BEST), Warn VR Evo, and select Smittybilt, Badlands, and Superwinches. Verify compatibility with your specific winch model before ordering
- Factor 55 Fairlead Cutout : Designed specifically for Factor 55 fairleads to protect synthetic winch rope from sharp edges. Other fairleads may require minor trimming
- Centered D-Ring Recovery Mounts : 3/4" thick laser-cut steel D-ring mounts centered on the winch plate the strongest pull point on the vehicle. Centering eliminates yaw during winch recoveries for safer, more controlled extractions
- Modular Replaceable Front Skin : The 8.5 lb aluminum skin is a separate modular component from the welded winch plate. Take a hard hit? Replace the skin the winch plate stays welded. Order a skin, not a bumper
- Auxiliary Lighting Ready : Ample clearance under the hoop for mounting auxiliary off-road lights. Compatible with most aftermarket lighting setups without obstructing grille airflow
- Optional Stainless Hardcore Upgrade : The stainless hardcore bumper upgrade shown in some product images is an optional accessory available separately. It is not included with this bumper
- Made in the USA : Precision CNC laser-cut and bent using updated Jeep JK CAD models for exact fitment on all 2007-2018 JK 2-door and JKU 4-door models
Specs
- Fitment: 2007-2018 Jeep Wrangler JK (2-door) and JKU (4-door)
- Skin Material: 3/16" 6061 CNC laser-cut & bent aluminum heat-treated structural alloy
- Skin Weight: 8 lbs
- Winch Plate: 3/16" steel weld-on only on JK version (no bolt option)
- Hoop: Front hoop included, guards grille, winch, and auxiliary lighting
- Installation: Requires trimming front frame plates, full instructions included (SEE BELOW FOR FULL INSTRUCTIONS)
- Winch Compatibility: Warn XD & XP (FITS BEST), Warn Zeon (FITS BEST), Warn VR Evo, select Smittybilt, Badlands, Superwinches
- Fairlead: Factor 55 hawse fairlead cutout (other fairleads may require minor trimming)
- Recovery Points: Centered 3/4" thick laser-cut steel D-ring mounts
- Design: Modular replaceable 8.5 lb aluminum skin independent of welded winch plate
- Optional Upgrade: Stainless Hardcore Bumper Upgrade available separately
- Finish: Ships raw aluminum ready for powder coat or paint
Brand: Savvy Offroad
Part number: SD0072












Reviews
There are no reviews yet.